Pedestrian simulation study of Mecca

Project Overview

Every year, millions of Muslims visit Mecca in Saudi Arabia to perform a religious pilgrimage, which is one of the largest, most culturally and geographically diverse mass gatherings in the world. 

When the pilgrims arrive at the Holy Grand Mosque of Mecca, they each make seven circumambulations (Tawaf) around the Kaaba ("The Cube"), in a counter-clockwise direction.

In addition to Tawaf movement which is the main movement pattern, there are many rituals that could be performed by visitors creating very complex movement patterns. Some visitors like to kiss the black stone located in the SOUTH/EAST corner of Kaaba, some others like to stand below Kaaba golden door, while others like to pray first raw to Kaaba. Some others like to enter Hijr Ismail, a small area north-west of the Kaaba with a low semi-circular wall, for private praying. 

Entering or exiting Hijr-Ismail can be very difficult during a crowded Tawaf, so effective and efficient crowd management is required for this situation.

The Hijr-Ismail shown infront of the Kaaba.

Using MassMotion

All of these complex mobility patterns have created mobility friction around Kaaba. The research team at Umm Al-Qura University has used MassMotion, the pedestrian simulation software from Oasys, because of its capability of simulating hundreds of thousands of people in a short time. As a task within a bigger project for analyzing mobility patterns around Kaaba, they have developed a simulation model that modeled complex mobility patterns around Kaaba including:

MassMotion model of the inner circle.

  1. Entering and Exiting from Tawaf Plaza
  2. Entering and Exiting from Tawaf rituals including 7 circumambulations     
  3. Entering and Exiting from Hijr Ismail
  4. Stopping around Kaaba
  5. Slowing down around Maqam Ibrahim
  6. Stopping for Kissing Black Stone
  7. Pausing at End/Start of each circumambulation     

The Results

MassMotion software enabled them to analyse and measure the density around the Kaaba to identify the critical areas. The analysis helped the team to calculate the total time needed to complete the Tawaf in very crowded and less crowded situations. The MassMotion analysis was also used to provide insight on how crowd movement would be affected if new constructions were added into the area. 

The simulation model will be used later in a bigger research project to analyze and evaluate some suggestions to mitigate movement problems around Kaaba. 


 

MassMotion reenacts circumambulations (Tawaf) crowd movement

MassMotion simulates the complex mobility patterns


MassMotion average density - the red represents a crowd of up to 6.50 people per m^2


Try MassMotion for free for 30 days. Download the free trial today.