Change Log

Contents


SlopeFE 20.0: New Features

  • First released as Build 21, 24 July 2014.
  • New program combining steady state seepage by finite elements with limit equilibrium slope stability analysis.
  • New ribbon interface for easier program navigation.
  • Added option for slope-like vertical equipotentials (build 23 onwards).
  • Added material partial factors to reinforcement data dialog (build 23 onwards).
  • SLOPEFE-6 Show surface loads on graphical output (build 25 onwards).
  • SLOPEFE-9 Remove the requirement to renumber nodes to minimise bandwidth (build 27 onwards).
  • SLOPEFE-10 Allow deletion of unattached nodes before mesh generation (build 27 onward

top ]


SlopeFE 20.0: Fixes

  • Installer rebuilt to include updated example files.
    (Fixed on 28 July 2014; released in SlopeFE 20.0 Build 22)
  • NCR 9481: Improve derivation of phreatic surface (remove zigzags).
    Fixed 27 October 2014; released in SlopeFE 20.0 Build 23.
  • SLOPEFE-3: Some elements are not shaded in filled contouring.
    Fixed 10 March 2015: released in SlopeFE 20.0 Build 24.
  • SLOPEFE-4: Slip surface and Specification dialog not updated on changing document.
    Fixed 10 March 2015: released in SlopeFE 20.0 Build 24.
  • SLOPEFE-5: Graphical output freezes if Specification dialog opened and minimised.
    Fixed 18 March 2015: released in SlopeFE 20. Build 25.
  • SLOPEFE-7: Spurious extra points added to stratum table when editing it directly.
    Fixed 31 March 2015: released in SlopeFE 20.0 Build 26.
  • SLOPEFE-8: Deleting mesh does not always work correctly.
    Fixed 31 March 2015: released in SlopeFE 20.0 Build 26.
  • SLOPEFE-11 : Incorrect lines defined as phreatic if only one stratum entered.
    Fixed 29 April 2015: released in SlopeFE 20.0 Build 27.
  • SLOPEFE-12 : Too many permeabilities created.
    Fixed 4 August 2015 : released in SlopeFE 20.0 Build 28.
  • SLOPEFE-13 : Materials not available to assign to strata.
    Fixed 4 August 2015 : released in SlopeFE 20.0 Build 28.
  • SLOPEFE-14 : Partial strata not completed to best effect.
    Fixed 4 August 2015 : released in SlopeFE 20.0 Build 28.

[ top ]